|4F, Building 1, Huaming Ind. Park, Longhua New District, Shenzhen, Guangdong, China||Lilyhu533@126.com|
|Place of Origin:||China|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||According to customer’s requirment|
refrigerant gas r134a,
r134a refrigerant 30lb
Refrigerant HFC - R134A in cylinder 30 lb Retrofitting for blowing agent in pharmaceutical
Boiling point 101.3KPa(℃)
Freezing point 101.3KPa (℃)
Critical temperature (℃)
Critical pressure (MPa)
Colorless and clear
Replaces CFC-12 in auto air conditioning and in residential, commercial and industrial refrigeration systems. New equipment.
Commercial Refrigeration: Performs well in small hermetic systems. Centrifugal Chiller Refrigerants: Used in many new chiller designs. Air Conditioning and Heat Pumps: Used in large screw chillers. EPA SNAP Approved. UL Listed.
When retrofitting R-12 systems to R-134a, it is necessary to replace the existing lubricant with POE oil, except in some automotive retrofit applications, which require PAG oil. In most cases, the mineral oil or alkylbenzene oil levels must be reduced below 5% of the new POE charge. Check with OEMs for any specific recommendations regarding oils or procedures. Remove as much of the existing lubricant as possible, add POE, and run the system on R-12 for some time. When the residual oil concentration is appropriate, remove R-12, replace the filter-drier, and charge R-134a.
HFC-134a is used as refrigerant in automobile air-conditioning, household and commercial refrigerant applications. It can also be used as aerosol, flame retardan, and blowing agent in pharmaceutical, agro-chemical, cosmetics and cleaning sectors.
1.R134A of all specifications
2.OEM is accepted